Angebote zu "Analysis" (15 Treffer)

Kategorien

Shops [Filter löschen]

Behavior of RPC Two-Way Slabs under Monotonic a...
71,90 € *
ggf. zzgl. Versand

This book studies, experimentally and theoretically, the behavior of reinforced Reactive Powder Concrete (RPC) two-way slabs under monotonic and five cycles of repeated load. A numerical analysis was performed for the monotonic test specimens using ANSYS 14.5 software. Calculations to determine the flexural moment capacity of the monotonic test specimens of the present study were presented depending on three models from previous studies, to find out if the previous equations are applicable to the reinforced RPC two-way slabs of the current study.

Anbieter: buecher.de
Stand: 24.08.2019
Zum Angebot
Aircraft Materials and Analysis
42,99 € *
ggf. zzgl. Versand

Publisher´s Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Complete coverage of aircraft design, manufacturing, and maintenance Aircraft Materials and Analysis addresses aircraft design, mechanical and structural factors in aviation, flight loads, structural integrity, stresses, properties of materials, compression, bending, and aircraft fatigue. Detailed analysis of the failure processis provided. This authoritative guide examines materials used in aircraft construction such as aluminum, steel, glass, composite, rubber, and carbon fiber. Maintenanceprocedures for corrosion and aging aircraft are discussed and methods of inspection such as nondestructive testingand nondestructive inspection are described. Accident investigation case studies review aircraft design, materialbehavior, NTSB findings, safety, stress factors, and human factor involvement. End-of-chapter questions reinforce thetopics covered in this practical resource. Aircraft Materials and Analysis covers: * The aircraft--standards for design, structural integrity, and system safety * Aircraft materials * Loads on the aircraft * Stress analysis * Torsion, compression, and bending loads * Aircraft riveted joints and pressure vessels * Heat treatments of metals * Aircraft fatigue/aircraft material fatigue * Aircraft corrosion * Dynamic stress, temperature stress, and experimental methods * Composites * Nondestructive Testing (NDT) * Aviation maintenance management * Case studies and human factors

Anbieter: buecher.de
Stand: 20.08.2019
Zum Angebot
Practical Binary Analysis
30,99 € *
ggf. zzgl. Versand

Stop manually analyzing binary! Practical Binary Analysis is the first book of its kind to present advanced binary analysis topics, such as binary instrumentation, dynamic taint analysis, and symbolic execution, in an accessible way. As malware increasingly obfuscates itself and applies anti-analysis techniques to thwart our analysis, we need more sophisticated methods that allow us to raise that dark curtain designed to keep us out--binary analysis can help. The goal of all binary analysis is to determine (and possibly modify) the true properties of binary programs to understand what they really do, rather than what we think they should do. While reverse engineering and disassembly are critical first steps in many forms of binary analysis, there is much more to be learned. This hands-on guide teaches you how to tackle the fascinating but challenging topics of binary analysis and instrumentation and helps you become proficient in an area typically only mastered by a small group of expert hackers. It will take you from basic concepts to state-of-the-art methods as you dig into topics like code injection, disassembly, dynamic taint analysis, and binary instrumentation. Written for security engineers, hackers, and those with a basic working knowledge of C/C++ and x86-64, Practical Binary Analysis will teach you in-depth how binary programs work and help you acquire the tools and techniques needed to gain more control and insight into binary programs. Once you´ve completed an introduction to basic binary formats, you´ll learn how to analyze binaries using techniques like the GNU/Linux binary analysis toolchain, disassembly, and code injection. You´ll then go on to implement profiling tools with Pin and learn how to build your own dynamic taint analysis tools with libdft and symbolic execution tools using Triton. You´ll learn how to: - Parse ELF and PE binaries and build a binary loader with libbfd - Use data-flow analysis techniques like program tracing, slicing, and reaching definitions analysis to reason about runtime flow of your programs - Modify ELF binaries with techniques like parasitic code injection and hex editing - Build custom disassembly tools with Capstone - Use binary instrumentation to circumvent anti-analysis tricks commonly used by malware - Apply taint analysis to detect control hijacking and data leak attacks - Use symbolic execution to build automatic exploitation tools With exercises at the end of each chapter to help solidify your skills, you´ll go from understanding basic assembly to performing some of the most sophisticated binary analysis and instrumentation. Practical Binary Analysis gives you what you need to work effectively with binary programs and transform your knowledge from basic understanding to expert-level proficiency.

Anbieter: buecher.de
Stand: 20.08.2019
Zum Angebot
Instrumented Testing And Analysis of Airfield M...
41,99 € *
ggf. zzgl. Versand

The U.S. military requires the ability to rapidly deploy troops, equipment, and materials anywhere in the world. Recent operations have brought attention to the need to utilize austere, unsurfaced, and sometimes sub-standard airfields within a theater of interest. These airfields may require additional taxiways and aprons. One option for the rapid construction of such is airfield matting systems. The focus of the work for this thesis was commercially available airfield matting systems to support large military transport aircraft, such as the C-17. Several test sections with differing strength soils were built with chosen mats tested in an elimination method, using a load cart that simulates contingency loading of one main gear of the C-17. Matting systems were evaluated based on logistical and assembly requirements, and deformation and damage sustained during traffic. A modeling effort was performed to investigate the potential of a simple model to predict the response of these matting systems under full-scale testing.

Anbieter: buecher.de
Stand: 20.08.2019
Zum Angebot
Clearing, Settlement and Custody
38,99 € *
ggf. zzgl. Versand

Summarizes worldwide changes in the process of concluding a financial transaction. This title provides a detailed analysis of the central clearing counterparty concept, the drivers behind it, and its effects on operations teams. It illustrates the life cycle of a series of transactions to broaden the comparison process.

Anbieter: buecher.de
Stand: 20.08.2019
Zum Angebot
An analytical study of cable stayed railway bri...
39,90 € *
ggf. zzgl. Versand

In this study different types of pylon shapes considered for Analysis under different loads viz. dead load, Multi-step static load and Moving vehicular load. For High Speed Train (80 m/s), which Shape seems to be better because less magnitude of displacement, Axial force, Shear force, Bending Moment and Displacement compare to other shape of pylon. From All these analytical result it is concluded that which Shape will perform better under High Speed Train.

Anbieter: buecher.de
Stand: 21.08.2019
Zum Angebot
Mechanical Vibrations in Spacecraft Design
108,99 € *
ggf. zzgl. Versand

All typical and special modal and response analysis methods, applied within the frame of the design of spacecraft structures, are described in this book. It therefore addresses graduate students and engineers in the aerospace field. TOC:Introduction.- Single Degree of Freedom System.- Damping Models.- Multi-Degrees of Freedom Linear Dynamic Systems.- Modal Analysis.- Natural Frequencies, an Approximation.- Modal Effective Mass.- Response Analysis.- Transient-Response Analysis.- Shock-Response Spectrum.- Random Vibration of Linear Dynamic Systems.- Low-Frequency Acoustic Loads, Structural Responses.- Statistical Energy Analysis.- Free-free Dynamic Systems, Inertia Relief.- Mode Acceleration Method.- Residual Vectors.- Dynamic Model Reduction Methods.- Component Mode Synthesis.- Load Transformation Matrices.

Anbieter: buecher.de
Stand: 20.08.2019
Zum Angebot
Massenpsychologie und Börse
49,99 € *
ggf. zzgl. Versand

So behalten Sie Nerven und Kurse im Griff. This is an in-depth and comprehensive analysis of the complex thermodynamic and dynamic phenomena experienced by a diesel engine during load increase, acceleration, cold starting or Transient Cycle, presenting the most important findings in the field. Psychologie spielt im Börsengeschehen bekanntermaßen eine große Rolle. Sie bietet nachvollziebare Erklärungen und wichtige Hinweise zum Verständnis von Kursschwankungen, die durch wiederkehrende Verhaltensmuster ausgelöst werden. Insbesondere Massenphänomene lassen sich an der Börse immer wieder beobachten. Wer sie durchschaut, ist im Vorteil und kann sein Anlage- und Beratungsverhalten optimieren. Masseneuphorien und Panikreaktionen bestimmen Kursverläufe. Die Gefühlsreaktionen der Anleger werden ständig durch psychologische Gestzmäßigkeiten beeinflusst, die sich in beeindruckender Regelmäßigkeit wiederholen. Dieses Buch erklärt die Zusammenhänge und bietet auf dieser Basis eine Vielzahl von Anregungen und Hilfestellungen für Berater und Anleger.

Anbieter: buecher.de
Stand: 20.08.2019
Zum Angebot
Riveted Lap Joints in Aircraft Fuselage
142,99 € *
ggf. zzgl. Versand

Fatigue of the pressurized fuselages of transport aircraft is a significant problem all builders and users of aircraft have to cope with for reasons associated with assuring a sufficient lifetime and safety, and formulating adequate inspection procedures. These aspects are all addressed in various formal protocols for creating and maintaining airworthiness, including damage tolerance considerations. In most transport aircraft, fatigue occurs in lap joints, sometimes leading to circumstances that threaten safety in critical ways. The problem of fatigue of lap joints has been considerably enlarged by the goal of extending aircraft lifetimes. Fatigue of riveted lap joints between aluminium alloy sheets, typical of the pressurized aircraft fuselage, is the major topic of the present book. The richly illustrated and well-structured chapters treat subjects such as: structural design solutions and loading conditions for fuselage skin joints; relevance of laboratory test results for simple lap joint specimens to riveted joints in a real structure; effect of various production and design related variables on the riveted joint fatigue behaviour; analytical and experimental results on load transmission in mechanically fastened lap joints; theoretical and experimental analysis of secondary bending and its implications for riveted joint fatigue performance; nucleation and shape development of fatigue cracks in riveted longitudinal lap joints; overview of experimental investigations into the multi-site damage for full scale fuselage panels and riveted lap joint specimens; fatigue crack growth and fatigue life prediction methodology for riveted lap joints; residual strength predictions for riveted lap joints in a fuselage structure. The major issues of each chapter are recapitulated in the last section.

Anbieter: buecher.de
Stand: 20.08.2019
Zum Angebot