Safe Load Indicator, Please note that the content of this book primarily consists of articles available from Wikipedia or other free sources online. A Safe Load Indicator (Sli) is a device fitted to a crane designed to alert the operator if the lift is ex
SpecificationsSound Generator SectionMaximum Polyphony: 4 voicesAssign Mode: MONO/UNISON/POLY/CHORDUser Memory Sound Patch: 64Sequencer Pattern: 64ControllersVOLUME knobRibbon controllers C1, C2LFO section:RATE indicator and sliderWAVE FORM select knobVCO section:MOD depth sliderRANGE select knobPULSE WIDTH sliderLFO/MAN/ENV select switchSOURCE MIXER section:PULSE level sliderSAW level sliderSUB OSC level sliderSUB OSC select sliderNOISE level sliderVCF section:FREQ: cutoff frequency sliderRES: resonance sliderENV: envelope depth sliderMOD: modulation depth sliderKYBD: key follow sliderVCA section:ENV/GATE select switchENV section:GATE+TRIG/GATE/LFO select switchA: attack time sliderD: decay time sliderS: sustain level sliderR: release time sliderController section:TRANSPOSE switch (L/M/H)VCO BENDER sens sliderVCF BENDER sens sliderLFO MOD sliderPORTAMENTO select switch (AUTO/OFF/ON)PORTAMENTO time knobMENU switch and indicatorSEQUENCER/ARPEGGIO section:1/LOAD switch and indicator2/PLAY switch and indicator3/DOWN switch and indicator4/U&D switch and indicator5/UP switch and indicator6/HOLD switch and indicator7/KEY TRANSPOSE switch and indicator8 switch and indicatorPower switchStep Sequencer100 steps4 notes (Polyphonic)ArpeggioDOWN/U&D/UP1 OCT/2 OCTDisplay7 segments, 4 characters (LED)ConnectorsCV OUT jack: mono miniature phone typeGATE OUT jack: mono miniature phone typeEXT CLK IN jack: mono miniature phone typePHONES jack: stereo miniature phone typeOUTPUT jack: stereo miniature phone typeMIX IN jack: stereo miniature phone typeMIDI (IN, OUT) connectorsUSB port: Micro-B type (Audio, MIDI)Power SupplyRechargeable Ni-MH battery (AA, HR6) x 4Alkaline battery (AA, LR6) x 4USB bus powerCurrent Draw500 mA (USB bus power)Expected battery life under continuous useRechargeable Ni-MH battery: Approx. 6 hours* This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of useAccessoriesOwner´s ManualLeaflet USING THE UNIT SAFELYAlkaline battery (AA, LR6) x 4Options (sold separately)Keyboard Unit: K-25mBoutique Dock: DK-01SIZE AND WEIGHTWidth 300 mm11-13/16 inchesDepth128 mm5-1/16 inchesHeight46 mm1-13/16 inchesWeight (including batteries)965 g2 lbs 3 oz
sound, the SD-1W hot rods the famous BOSS overdrive with all-discrete analogue circuitry. Standard mode captures the classic SD-1 sound while Custom mode offers new tonal range and gain.Special edition Waza Craft pedal delivers the ultimate BOSS tone experiencePremium sound based on the legendary SD-1 Super OverdriveNewly revised, all-analogue discrete amplifier circuitStandard and Custom sound modesHighly responsive to picking dynamics and volume changesBOSS five-year warrantyWAZA CRAFT: THE ART OF SUPERIOR TONESince the beginning, the engineers at BOSS have been committed to achieving the finest guitar tones using any technology necessary, from old-school analogue circuits to high-tech DSP. Continuing this enthusiastic spirit, we are pleased to introduce the new Waza Craft series. In Japan, ´´Waza” is the term for art and technique, and these special edition pedals proudly carry the Waza symbol to represent the pinnacle of BOSS design and craftsmanship. With final sound approval carried out by BOSS in Japan, the Waza Craft series brings you exceptional tone and touch response through carefully-selected analogue components, refined circuitry, and meticulous attention to detail.SPECIFICATIONSNominal Input Level-20 dBuInput Impedance1 M ohmNominal Output Level-20 dBuOutput Impedance1 k ohmRecommended Load Impedance10 k ohms or greaterControlsPedal switchMode switchLEVEL knobTONE knobDRIVE knobIndicatorCHECK indicator (Serves also as battery check indicator)ConnectorsINPUT jackOUTPUT jackDC IN jackPower SupplyAlkaline battery (9 V, 6LR61) or Carbon-zinc battery (9 V, 6F22)AC adaptor (sold separately)Current Draw15 mAAccessoriesOwner´s ManualLeaflet (USING THE UNIT SAFELY, IMPORTANT NOTE, and Information)Carbon-zinc battery (9 V, 6F22)Option (sold separately)AC adaptor (PSA series)SIZE AND WEIGHTWidth73 mm2-7/8 inchesDepth129 mm5-1/8 inchesHeight59 mm2-6/16 inchesWeight430 g0 lbs. 16 oz.* 0 dBu = 0.775 Vrms
Ever since being discontinued way back in 1984, the BOSS DM-2 Delay pedal has remained highly sought after by players everywhere for its warm, ´´bucket brigade” analogue delay tone. Now, the DM is back! With the Waza Craft DM-2W, the coveted stomp has been reborn with switchable sound modes and greater versatility for today’s music styles. Using 100-percent analog circuitry, the DM-2W’s Standard mode nails the lush sound and 20-300 ms delay range of the original DM-2. Flipping into Custom mode instantly changes the sound character to a cleaner analogue tone with over twice the available delay time.Special edition Waza Craft pedal delivers the ultimate BOSS tone experienceTrue reproduction of the vintage DM-2 Delay soundPremium all-analogue circuit with BBD (bucket brigade) delay lineStandard mode for authentic DM-2 tone with 20-300 ms delay timeCustom mode provides warm-yet-clear delay sound and over twice the delay timeExpression pedal input for foot control of delay timeTwo output jacks allow separate output of delay and direct soundsBOSS five-year warrantyWAZA CRAFT: THE ART OF SUPERIOR TONESince the beginning, the engineers at BOSS have been committed to achieving the finest guitar tones using any technology necessary, from old-school analogue circuits to high-tech DSP. Continuing this enthusiastic spirit, we are pleased to introduce the new Waza Craft series. In Japan, ´´Waza” is the term for art and technique, and these special edition pedals proudly carry the Waza symbol to represent the pinnacle of BOSS design and craftsmanship. With final sound approval carried out by BOSS in Japan, the Waza Craft series brings you exceptional tone and touch response through carefully-selected analogue components, refined circuitry, and meticulous attention to detail.SPECIFICATIONSNominal Input Level-20 dBuInput Impedance1 M ohmNominal Output Level-20 dBuOutput Impedance1 k ohmRecommended Load Impedance10 k ohms or greaterControlsPedal switchREPEAT RATE knobINTENSITY knobECHO knobMode switchIndicatorCHECK indicator (Serves also as battery check indicator)ConnectorsINPUT jack: 1/4-inch phone typeOUTPUT jack: 1/4-inch phone typeDIRECT OUT jack: 1/4-inch phone typeRATE jack: 1/4-inch TRS phone typeDC IN jackPower SupplyAlkaline battery (9 V, 6LR61) or Carbon-zinc battery (9 V, 6F22)AC adaptor (sold separately)AccessoriesOwner´s manualLeaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information)Alkaline battery (9 V, 6LR61)Options (sold separately)AC adaptor: PSA seriesExpression pedal: Roland EV-5SIZE AND WEIGHTWidth73 mm2-7/8 inchesDepth129 mm5-1/8 inchesHeight59 mm2-6/16 inchesWeight460 g1 lbs. 1 oz.* 0 dBu = 0.775 Vrms
The AEA TRP2 preamp provides two channels of high-output, high-impedance, and low-noise gain in a half-rack package with a rich and natural sound that brings out the full potential of your microphones.- Two channels with 85dB of sweet and quiet JFET gain- Switchable phantom-power, polarity reverse, and high-pass filter- 63k ohm high-impedance circuitry providing better overall transients, frequency response, and higher output sensitivity- Optimized for ribbon mics, condensers, and dynamics- Switching power supply for easy use in any country- 1U half-rack with optional hardware for mounting one or two units together- Made in the U.S.A.CARACTERISTIQUES- Gain at 1kHz: 85dB of gain at 1kHz, balanced-in to balanced-out in Microphone Input mode- Noisefigure,rmsA-weighted: - Noise figure, rms unweighted: - EIN: - Frequency Response: -3dB 100 kHz- THD: - Input Impedance: 63K Ohms- Input Impedance (P48 Engaged): 10K Ohms- Mic Gain Control: Twelve-position switch provides from +7dB to +63dB of gain for the preamplifier circuit, as measured between the input and the before the output line driver.- Output Level Potentiometer: 25dB- Low-Cut Filter: 12dB per octave from 100 Hz- XLR output maximum level into 600Ω load: +28 dBu, balanced; 0 dBu = 0.7746 V rms- XLR connectors polarity: Pin-1 is ground, pin-2 is high, pin-3 is low- LED signal level indicators: The green LED snaps on at -20 dBu to indicate the presence of signal; the yellow LED snaps on at 0 dBu; the red LED snaps on at +24 dBu to warn of approaching signal overload.-Dimensions: Half-rack wide, rack unit high (measured without knobs and switches):8.5” w, 8.5 d, 1.5” h (36.7 cm x 36.7 cm x 4.3 cm)- Weight: 2lbs oz (0.9 kg)
The SYSTEM-1m is a semi-modular synthesizer with PLUG-OUT capability and a unique design that can be used as a Eurorack module, tabletop synth, or 19” rackmount unit. In addition to being a powerful standalone instrument, the SYSTEM-1m has external inputs and an array of CV/Gate connections that allow it to be re-patched and to interface with other modular synthesizer systems. The SYSTEM-1m’s CV/Gate connections combined with its ability to load classic Roland PLUG-OUT synth models like the SH-101 and PROMARS give it power and flexibility that is simply unparalleled.Key Features- Semi-modular synthesizer with PLUG-OUT capability- 19 color-coded CV/Gate and audio connections with LED lighting- 84 HP Eurorack, tabletop and 19” rack compatible using AC adaptor or Eurorack power- Versatile oscillators with six waveforms, Crossmod, Ring Mod, Sync and Color control- All parameters controlled with high-resolution knobs and sliders with LED indicators- External input for processing external signals through filter, amp and FX section- -12 dB and -24 dB filter types with independent high-pass filters- Integrated tone, crusher, reverb and delay effects- Tempo syncing for LFO and delay- 24-bit/96kHz audio and MIDI interface- AIRA Link for easy connection to MX-1 Mix Performer- Includes rackmount adapter and braided patch cables
Like the console-based API 205L, the 505-DI is specifically designed to accept a guitar, bass or keyboard direct input while minimizing any loading effect on Hi-Z instrument pickups. Additionally, the 505-DI´s Gain Control is used to normalize an instrument´s input level, up to a +4 dBu output level. API´s unique TONE control reduces potential low end mud in the signal, while turning on the BRIGHT switch adds additional clarity if desired. The various combinations of TONE and BRIGHT controls can eliminate the need for any EQ on the instrument while recording, keeping the signal path short and pure.This minimal signal path eliminates the need to use a standard direct box, which many times still requires a mic input, equalizer, and a fader to get the signal to a recordable level. The 505-DI is capable of boosting any instrument to a hefty line level without additional amplifiers. Use of the 100K / 400K LOAD switch allows the tone of the pickup to be altered slightly, alternately brightening or darkening the high frequency content. When inserting an instrument with an internal preamp or a line level instrument such as a sampler or a keyboard, the 505-DI offers a 20 dB PAD switch to drop the level without loading, thereby retaining the integrity of the incoming signal.Features:Wide Range Gain Control with 55dB of gainFront Panel Hi-Z InputFront Panel Thru routingTONE Control helps customize your soundBRIGHT Switch boosts clarity and presence10 segment LED VU meter for monitoring output levelPeak Output LED Indicator20 dB pad switch, applies to mic/line/instrument100K / 400K Switchable LoadTraditional API fully discrete circuit designUses the famous API 2520 and 2510 Op-Amps
* 0 dBu = 0.775 Vrms * The battery that was supplied with the unit is for temporary use, intended primarily for testing the unit’s operation. We suggest replacing this with an alkaline dry cell. * The specifications are subject to change without notice.BOSS celebrates the 10th anniversary of the Loop Station with a dynamic new lineup of RC-series loopers. Introducing the RC-3 and RC-30 . . . portable, powerful pedals with super-sized internal memory that captures up to three hours of stereo looping! The RC-3 is a one-track stereo Looper housed in a compact pedal; the RC-30 is the two-track version in twin-pedal format. No matter what instrument you play or noises you make, the new RC series is ready to loop it. Plug in your instrument of choice, even a microphone; the RC-30 has an XLR input, complete with phantom power. Both pedals are equipped with USB 2.0 ports that let you save your loops externally, as well as import and export WAV files. • Twin Pedal multitrack looper with true stereo I/O • Two synchronized stereo tracks with dedicated volume faders and track-select buttons • Massive internal memory with up to three hours of stereo recording time • 99 onboard memory phrases for storing loops • Built-in effects for processing loops • Multiple inputs: 1/4 A and B input jacks, stereo 1/8 mini AUX input jack, XLR input jack with phantom power • USB 2.0 port allows you to connect to a PC and import/export WAV audio • Rhythm guide with real drums • Runs on batteries or optional AC power supply • Nominal Input Level INPUT: -20 dBu, AUX IN: -10 dBu • Input Impedance INPUT: 1 MΩ; AUX IN: 22 kΩ • Nominal Output Level -20 dBu • Output Impedance 1 kΩ • Recommended Load Impedance 10 kΩ or larger • Recording/Playback Maximum Recording Time: Approximately 3 hours, Maximum Phrase Memory: 99 phrases, Number of tracks: 1, Data Format: WAV (44.1 kHz, 16-bit linear, stereo) • Rhythm Type Hi-Hat, Kick & Hi-Hat, Rock 1, Rock 2, Pop, Funk, Shuffle, R & B, Latin, Percussion • USB Interface Hi-Speed USB mass storage device class • Controls Pedal switch, LOOP OUTPUT knob, RHYTHM OUTPUT knob, DOWN button, UP button, WRITE button, RHYTHM ON/OFF button, TAP TEMPO button • Indicators REC, PLAY (DUB) indicator • Display 7 segments, 2 characters (LED) • Connectors INPUT A Jack: 1/4 phone type, INPUT B Jack: 1/4 phone type, AUX IN Jack: Stereo miniature phone type, OUTPUT A Jack: 1/4 phone type, OUTPUT B Jack: 1/4 phone type, STOP/MEMORY SHIFT Jack: 1/4 TRS phone type, USB Connector, DC IN Jack (DC 9 V) • Power Supply DC 9 V: Alkaline battery (9 V, 6LR61), AC Adaptor (PSA series: sold separately) * Rechargeable Ni-MH batteries cannot be used. • Current Draw 70 mA (DC 9 V) * Expected battery life under continuous use: Alkaline battery (9 V, 6LR61): Approx. 3 hours. These figures will vary depending on the actual conditions of use. • Dimensions 73 (W) x 129 (D) x 59 (H) mm / 2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches • Weight 450 g / 1 lb (including battery) • Included Accessories Owner’s Manual, Leaflet (´´USING THE UNIT SAFELY,” ´´IMPORTANT NOTES,” and ´´Information”), Alkaline battery (9 V, 6LR61): already installed in unit • Options AC Adaptor (PSA series), Footswitch (FS-5U, FS-6) * 0 dBu = 0.775 Vrms * The battery that was supplied with the unit is for temporary use, intended primarily for testing the unit’s operation. We suggest replacing this with an alkaline dry cell. * The specifications are subject to change without notice.
Beautiful sound and beautiful design (DS-DAC-100) Even when you take your computer on a vacation or business trip, you still want easily portable high quality sound. Pack the DS-DAC-100m and your favorite headphones, and you´ll be able to reproduce the pristine desktop listening environment of your home or workplace wherever you go. AudioGate 3 and DS-DAC series --- the simplest high-quality audio playback systemSimply connect the DS-DAC-100/100m to your computer via USB cable, and you have a high-quality audio playback system. The system consists of AudioGate 3 software that plays back audio material from your computer with the best possible quality, together with the DS-DAC-100/100m which converts the data converted by AudioGate 3 into an analog signal for playback through your headphones or speaker system. Realtime DSD conversion for ideal soundAccurate realtime DSD-analog conversion is the secret to high-quality audio playback through headphones or your high-end audio system. Audio files such as MP3 and WAV from your computer (even a CD!) can be converted to 5.6448 MHz/DSD data in real time and played back by the dedicated AudioGate 3 software. The DS-DAC-100/100m, optimally designed for DSD, then converts the data to an analog signal for the ideal audio playback. You might even start hearing new details in your familiar CD or MP3 collection.DSD native playback of 2.8224 MHz and 5.6448 MHz DSD filesKORG was among the earliest audio companies to focus on the high sound quality benefits of DSD, using DSD as the recording format for the highly acclaimed MR series of studio and field recorders. These recorders support playback not only of 2.8224 MHz DSD data but also the still higher-resolution 5.6448 MHz that is even more faithful to the original source.Dedicated driver developed specifically for the DS-DAC-100/100mTo ensure trouble-free compatibility between the playback software and the DAC, we have taken advantage of our many years of experience with DSD data to create drivers that deliver stable operation and the highest-quality playback on both Windows and Mac.DA ConverterCirrus Logic CS4398 Audio InterfaceNumber of channels : 2Input format (USB) :DSD?2.8224MHz/5.6448MHz, 1bitPCM?44.1kHz/48kHz/88,2kHz/96kHz/176.4kHz/192kHz, 16bit/24bitHost Interface : USB2.0 (High Speed)Audio Driver : ASIO (DSD playback is supported by the DSD option of ASIO 2.1 and later), WDM, Core AudioGeneralIndicator : Power Indicator, sampling frequency/Headphone volume Indicator x 8 (LED)Power : USB bus power (5V, Max: 500mA?Power consumption : Max: 2.5WDimensions : 92 (W) x 129 (D) x 19.5 (H) mm / 3.62 (W) x 5.08 (D) x 0.77 (H) inch (including protrusions)Weight : 175 g / 0.39 lbsMain standardsFrequency response characteristics:10Hz - 20kHz ±1dB (fs=44.1kHz/48kHz)10Hz - 40kHz ±1dBS/N : 105dB (TYP.) 20Hz - 20kHz, IHF-ATHD+N : 0.005% (TYP.) 20Hz - 20kHzLINE OUT L/RConnector : ?3.5 mm Stereo Mini Phone JackOutput load impedance : More than 10k?Nominal level : -6dBVMaximum Output level : +6dBV (0dBFS 0dB-SACD)PHONESConnector : ?3.5 mm Stereo Mini Phone JackOutput load impedance : More than 16?Maximum Output level : 85mW + 85mW @32?USB (Device)Connector : Type BFormat : USB 2.0 compliant high-speedAccessories : USB cableOperating requirements for DS-DAC-100/100m[Windows]OS: Microsoft Windows XP Home Edition/Professional Edition Service Pack 3 (32bit), Microsoft Windows Vista Service Pack 2 (32bit, 64bit), Microsoft Windows 7 (32bit, 64bit), Microsoft Windows 8.1 (32bit, 64bit)CPU: Intel Pentium III 1GHz or more (Core 2 Duo 2.66 GHz or more is recommended)RAM: 256 MB or more (1 GB or more is recommended)[Macintosh]OS: Mac OS X 10.6 or laterCPU: Intel processor (Core 2 Duo 2.4 GHz or more is recommended)RAM: 1GB or more*For both Windows (ASIO) and Mac, DSD native playback is supported only when using the KORG USB Audio Device Driver.*The following limitations on operating environment exist as of October 2013, but are expected to be fixed or supported in the future.- Mac OS X Gatekeeper is not supported.- In some cases, the system might not operate correctly with USB 3.0. It may be possible to solve the problem by installing the latest USB driver, by connecting to a different USB port, or by using a self-powered USB hub. If the problem remains, please connect the system to a USB 2.0 port.Operating requirements for AudioGate 3[Windows]OS: Microsoft Windows XP Home Edition/Professional Edition Service Pack 3 (32bit), Microsoft...
Switches two heads using one speaker cabinet Choice of direct or buffered input Digital micro-controlled relays for failsafe switchingSlingshot™ remote-controlled switching input Models for tube amps (VT), solid-state (SS) or both (TS) The Radial Headbone is an advanced ´head switching device´ that allows two different guitar amplifier heads to be used with a single speaker cabinet. With Headbone, one head could be used for rhythm while a second head could be used for soloing. With 100% discreet class-A circuitry and choice of either buffered or un-buffered inputs, the Headbone will be of particular interest for players that demand the utmost in tonal performance. The Headbone´s internal switching comprises a sequence of relays, photocells, and load resistors, all of which are controlled via a digitally programmed chip. Hit the footswitch and the Headbone toggles the guitar signal from one amp to the other, disconnects the speaker and diverts the signal to a load resister, reconnects the speaker to the second head and turns on the guitar, all in quick succession. The Headbone features SafeModeT whereby even when power is disconnected; the Headbone will automatically default to a ´head-1 to cabinet´ status, ensuring a constant load on the amplifier. To eliminate running guitar and speaker cables to-and-from the amplifier and the pedal board, the Headbone is equipped with SlingshotT, an easy to use remote control system that employs a standard foot switch to toggle the Headbone´s status from a remote pedal board. The Headbone is available in 3 models: The VT for two valve-tube heads; the SS for two solid-state heads; and the TS for Tube to solid state switching. Headbone. another Radial ´power tool´ for serious guitarists. The Radial Headbone combines simplicity with functionality. Hook-up was designed to be intuitive for all users, be they neophyte or experienced technician. Most will be able to connect and play through the unit with very little reference to the supplied user guide. In use, the Cabbone is a model of logical design and offers the professional guitarist the ultimate in creative options on stage through smooth and noise free amplifier switching. An on-board footswitch toggles between amp heads and large LED indicators monitors the current signal path. Tonebone´s versatile Slingshot™ system allows remote controlled switching between heads from any stage position (eg.: a pedalboard) using just regular ¼” to ¼” guitar cables.